Description
PCB terminal block, nominal current: 24 A, rated voltage (III/2): 400 V, nominal cross section: 2.5 mm2, number of rows: 1, number of positions per row: 2, product range: MKDSP 3, pitch: 5 mm, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, Solder pin [P]: 5 mm, number of solder pins per potential: 1
Type | PC terminal block can be aligned |
Product line | COMBICON Terminals M |
Product type | Printed circuit board terminal |
Number of positions | 2 |
Pitch | 5 mm |
Number of rows | 1 |
Solder pins per potential | 1 |
Nominal current IN | 24 A |
Nominal voltage UN | 400 V |
Degree of pollution | 3 |
Rated voltage (III/3) | 250 V |
Rated surge voltage (III/3) | 4 kV |
Rated voltage (III/2) | 400 V |
Rated surge voltage (III/2) | 4 kV |
Connection technology | |
Type | PC terminal block can be aligned |
Nominal cross section | 2.5 mm² |
Conductor connection | |
Connection method | Screw connection with tension sleeve |
Conductor cross section solid | 0.2 mm² … 4 mm² |
Conductor cross section flexible | 0.2 mm² … 2.5 mm² |
Conductor cross section AWG | 24 … 12 |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² … 2.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² … 2.5 mm² |
2 conductors with same cross section, solid | 0.2 mm² … 1.5 mm² |
2 conductors with same cross section, flexible | 0.2 mm² … 1.5 mm² |
2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² … 0.75 mm² |
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² … 1.5 mm² |
Stripping length | 8 mm |
Tightening torque | 0.5 Nm … 0.6 Nm |
Mounting type | Wave soldering |
Material data – contact | |
Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
Contact material | Cu alloy |
Surface characteristics | Tin-plated |
Metal surface terminal point (top layer) | Tin (5 – 7 µm Sn) |
Metal surface soldering area (top layer) | Tin (5 – 7 µm Sn) |
Material data – housing | |
Color () | () |
Insulating material | PA |
Insulating material group | I |
CTI according to IEC 60112 | 600 |
Flammability rating according to UL 94 | V0 |
Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Material data – actuating element | |
Color () | () |
Note on application | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
Dimensional drawing | |
Pitch | 5 mm |
Length [l] | 12.8 mm |
Installed height | 18 mm |
Solder pin length [P] | 5 mm |
Test for conductor damage and slackening | |
Specification | IEC 60998-2-1:1990-04 |
Result | Test passed |
Pull-out test | |
Specification | IEC 60998-2-1:1990-04 |
Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
0.2 mm² / flexible / > 10 N | |
4 mm² / solid / > 60 N | |
2.5 mm² / flexible / > 50 N | |
Torque test | |
Specification | IEC 60998-2-1:1990-04 |
Temperature-rise test | |
Specification | IEC 60998-2-1:1990-04 |
Requirement temperature-rise test | Increase in temperature ≤ 45 K |
Insulation resistance | |
Specification | IEC 60998-2-1:1990-04 |
Insulation resistance, neighboring positions | 109 Ω |
Air clearances and creepage distances | | |
Specification | IEC 60664-1:2007-04 |
Insulating material group | I |
Comparative tracking index (IEC 60112) | CTI 600 |
Rated insulation voltage (III/3) | 250 V |
Rated surge voltage (III/3) | 4 kV |
minimum clearance value – non-homogenous field (III/3) | 3 mm |
minimum creepage distance (III/3) | 3.2 mm |
Rated insulation voltage (III/2) | 400 V |
Rated surge voltage (III/2) | 4 kV |
minimum clearance value – non-homogenous field (III/2) | 3 mm |
minimum creepage distance (III/2) | 3 mm |
Rated insulation voltage (II/2) | 630 V |
Rated surge voltage (II/2) | 4 kV |
minimum clearance value – non-homogenous field (II/2) | 3 mm |
minimum creepage distance (II/2) | 3.2 mm |
Vibration test | |
Specification | IEC 60068-2-6:1995-03 |
Frequency | 10 – 150 – 10 Hz |
Sweep speed | 1 octave/min |
Amplitude | 0.35 mm (10 Hz … 60.1 Hz) |
Sweep speed | 5g (60.1 Hz … 150 Hz) |
Test duration per axis | 2.5 h |
Glow-wire test | |
Specification | IEC 60998-2-1:1990-04 |
Temperature | 850 °C |
Time of exposure | 5 s |
Ambient conditions | |
Ambient temperature (operation) | -40 °C … 100 °C (Depending on the current carrying capacity/derating curve) |
Ambient temperature (storage/transport) | -40 °C … 70 °C |
Relative humidity (storage/transport) | 30 % … 70 % |
Ambient temperature (assembly) | -5 °C … 100 °C |
Item number | 1731608 |
Packing unit | 50 pc |
Minimum order quantity | 1 pc |
Note | Made to Order (non-returnable) |
Sales Key | AAA |
Product Key | AAMFIL |
GTIN | 4017918258795 |
Weight per Piece (including packing) | 4.44 g |
Weight per Piece (excluding packing) | 4.04 g |
Customs tariff number | 85369010 |
Country of origin | DE |
ECLASS
ECLASS-9.0 | 27440401 |
Well-known connection principle allows worldwide use|Low temperature rise, thanks to maximum contact force|Allows connection of two conductors|Quick and convenient testing using integrated test option|Integrated protective guide prevents incorrect insertion of the conductor underneath the tension sleeve|The latching on the side enables various numbers of positions to be combined