Description
Inline, Temperature measurement terminal, Analog RTD inputs: 8 (for resistance temperature detectors), connection technology: 4-conductor, transmission speed in the local bus: 500 kbps, Extreme conditions version, degree of protection: IP20, including Inline connectors and marking fields
| Dimensional drawing | |
| Width | 48.8 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Note on dimensions | Housing dimensions |
| Color | green |
| Inline local bus | |
| Number of interfaces | 2 |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps |
| Transmission physics | Copper |
| Module | |
| ID code (dec.) | 223 |
| ID code (hex) | DF |
| Length code (hex) | 05 |
| Length code (dec) | 05 |
| Process data channel | 80 Bit |
| Input address area | 10 Byte |
| Output address area | 10 Byte |
| Register length | 96 Bit |
| Required parameter data | 31 Byte |
| Required configuration data | 5 Byte |
| Analog | |
| Input name | Analog RTD inputs |
| Description of the input | Input for resistive temperature sensors |
| Number of inputs | 8 (for resistance temperature detectors) |
| Connection method | Spring-cage connection |
| Connection technology | 4-conductor |
| Note regarding the connection technology | shielded |
| A/D converter resolution | 24 bit |
| Sensor types (RTD) that can be used | Pt, Ni, KTY, Cu sensors, linear resistors |
| Data formats | IB IL, S7-compatible |
| Measuring principle | Sigma/Delta process |
| Measured value representation | 16 bits (15 bits + sign bit) |
| Input filter time | 100 ms |
| 120 ms | |
| 200 ms | |
| 480 ms (adjustable) | |
| Linear resistance measuring range | 0 Ω … 500 Ω |
| 0 Ω … 5 kΩ | |
| 0 Ω … 30 kΩ | |
| Process data update | 1.8 s (Up to 3.3 s possible depending on operating mode) |
| Type | modular |
| Product type | I/O component |
| Scope of delivery | including Inline connectors and marking fields |
| Operating mode | Process data mode with 5 words/1 word PCP |
| Diagnostics messages | Failure of the internal I/O supply I/O error message sent to the bus coupler |
| Failure of or insufficient communications power UL I/O error message sent to the bus coupler | |
| User error Error message in the process data |
| Potentials | |
| Power consumption | typ. 0.85 W (entire device) |
| Potentials: Communications power (UL) | |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 120 mA |
| typ. 95 mA | |
| Potentials: Supply of analog modules (UANA) | |
| Supply voltage | 24 V DC (via voltage jumper) |
| Supply voltage range | 19.2 V DC … 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 15 mA |
| typ. 6 mA | |
| Connection technology | |
| Connection name | Inline connector |
| Conductor connection | |
| Connection method | Spring-cage connection |
| Conductor cross section solid | 0.08 mm² … 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² … 1.5 mm² |
| Conductor cross section AWG | 28 … 16 |
| Stripping length | 8 mm |
| Inline connector | |
| Connection method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² … 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² … 1.5 mm² |
| Conductor cross section AWG | 28 … 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C … 60 °C (Standard) |
| -40 °C … 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) | |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa … 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa … 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Permissible humidity (operation) | 10 % … 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % … 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
Pt, Ni, Cu, KTY sensor types according to DIN and SAMA|Connection of 8 RTD temperature sensors and linear resistors in 4-conductor technology|High precision and noise immunity|Temperature stability|High-resolution temperature and resistance measurement|Resistance values can be preset separately via parameterization bits|The channels are parameterized independently of one another via the bus system|Parameterization of wire-break detection sensitivity (firmware 1.10 or later)|Additional representation in float format according to IEEE754|Channel scout functionality, for optical channel identification during startup|Can be used under extreme ambient conditions|Extended temperature range of -40 °C … +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)|Coated PCBs
