Description
Uninterruptible power supply with integrated power supply unit, 4 A, in combination with MINI-BAT/12/DC 1.6 Ah or 2.6 Ah
Product type | Uninterruptible power supply |
IQ technology | no |
MTBF (IEC 61709, SN 29500) | > 728000 h (40 °C) |
Insulation characteristics | |
Protection class | II (in closed control cabinet) |
Degree of pollution | 2 |
Insulation voltage input/output | 4 kV (type test) |
2 kV (routine test) |
DC operation | |
Input voltage | 12 V DC |
Input voltage range | 100 V DC … 350 V DC (UL508: 100…250 V DC) |
Voltage type of supply voltage | DC |
Inrush current | < 34 A |
Inrush current integral (I2t) | < 1.1 A2s |
Mains buffering time | see diagram |
Buffer period | 20 min. (4 A) |
Rotary selector switch | Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent |
Current consumption | 0.5 A |
0.65 A (230 V AC) | |
1.15 A | |
1.35 A (120 V AC) | |
Protective circuit | Varistor |
Power factor (cos phi) | approx. 0.5 |
Typical response time | 100 ms |
Input fuse | 3.15 A (slow-blow, internal) |
Permissible backup fuse | B6 B10 B16 |
Recommended breaker for input protection | 6 A … 16 A (Characteristics B, C, D, K) |
AC operation | |
Nominal input voltage range | 100 V AC … 240 V AC |
Input voltage range | 85 V AC … 264 V AC |
Voltage type of supply voltage | AC |
Efficiency | > 82 % |
Nominal output voltage | 12 V DC (AC input voltage available: 10 to 16 V DC, AC input voltage not available: 13.6 to 9.6 V DC) |
Setting range of the output voltage (USet) | 10 V DC … 16 V DC (AC input voltage available, AC input voltage not available: Output voltage depending on the battery voltage: 13.6 V DC … 9.6 V DC) |
Nominal output current (IN) | 4 A |
Output current limit | max. 7 A |
Bridging time | 1200 s |
Derating | 60 °C … 70 °C (2.5%/K) |
Feedback voltage resistance | 35 V DC |
Protection against overvoltage at the output (OVP) | < 35 V DC |
Max. capacitive load | unlimited |
Control deviation | < 1 % (change in load, static 10 % … 90 %) |
Residual ripple | < 50 mVPP |
Output power | 48 W |
Peak switching voltages nominal load | < 100 mVPP |
Maximum no-load power dissipation | 3.8 W |
Power loss nominal load max. | 10.5 W |
Power dissipation battery operation | 2.9 W |
Power dissipation | 1.6 W |
10.5 W | |
2.6 W | |
Rise time | < 100 ms |
Connection in parallel | yes |
Connection in series | No |
Mains operation | |
Nominal output voltage | 12 V DC |
Output voltage range | 22.5 V DC … 29.5 V DC |
Nominal output current (IN) | 4 A |
Battery operation | |
Nominal output voltage | 12 V DC |
Output voltage range | 19.2 V DC … 27.6 V DC (UOUT = UBAT – 0,5 V DC) |
Nominal output current (IN) | 4 A |
Signal | |
Continuous load current | ≤ 20 mA |
Signal: Alarm | |
Output description | Relay output |
Maximum switching voltage | ≤ 12 V |
Output voltage | 12 V |
Continuous load current | ≤ 200 mA |
Signal: Battery charge | |
Output description | Relay output |
Maximum switching voltage | ≤ 12 V |
Output voltage | 12 V |
Continuous load current | ≤ 200 mA |
Signal: Battery mode | |
Output description | Relay output |
Maximum switching voltage | ≤ 12 V |
Output voltage | 12 V |
Continuous load current | ≤ 200 mA |
Charging current | 1 A |
Memory medium | external, rechargeable battery 1.6 Ah / 2.6 Ah |
IQ technology | no |
Network management | No |
Input | |
Connection method | Pluggable COMBICON screw connections |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 8 mm |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Output | |
Connection method | Pluggable COMBICON screw connections |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Stripping length | 8 mm |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Signal | |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Types of signaling | LED |
Signal output | |
Status display | LED “Power Good”, green |
Note on status display | Buffer module is loaded: LED ON |
Signal output: Alarm | |
Status display | LED red |
Note on status display | Malfunction/alarm: LED permanently lit |
Signal output: Battery charge | |
Status display | LED flashing yellow |
Note on status display | Battery charge/battery is being charged: LED flashing |
Signal output: Battery mode | |
Status display | Yellow LED |
Note on status display | Battery mode/buffer mode: LED permanently lit |
Width | 67.5 mm |
Height | 99 mm |
Depth | 107 mm |
Installation dimensions | |
Installation distance right/left | 0 mm / 0 mm |
Installation distance top/bottom | 30 mm / 30 mm |
Color | green |
Housing material | Plastic |
Type of housing | Polyamide PA, color: green |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C … 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) | -40 °C … 80 °C |
Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz … 150 Hz, 2.3g, 90 min. |
UL approvals | UL Listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |