Description
Pre-assembled solid-state relay module with screw connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 3 – 33 V DC/3 A
Product type | Solid-state relay module |
Application | Universal |
Operating mode | 100% operating factor |
Insulation characteristics | |
Overvoltage category | III |
Pollution degree | 2 |
Insulation | Basic insulation |
Maximum power dissipation for nominal condition | 0.2 W |
Test voltage Input/output | 2.5 kVrms (50 Hz, 1 min., input/output) |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 4 kV |
Rated actuating voltage UC | 24 V DC |
Voltage range with reference to UC | 0.8 … 1.2 |
Rated actuating current IC | 8.5 mA |
Input voltage range | 19.2 V DC … 28.8 V DC |
“0” signal switching threshold in reference to UC | < 0.4 |
“1” signal switching threshold in reference to UC | > 0.8 |
Typical response time | 20 µs |
Typical turn-off time | 300 µs |
Status display | Yellow LED |
Protective circuit | Freewheeling diode |
Transmission frequency | 300 Hz |
Contact type | 1 N/O contact |
Design of digital output | electronic |
Output voltage range | 3 V DC … 33 V DC |
Limiting continuous current | 3 A (see derating curve) |
Maximum inrush current | 15 A (10 ms) |
Surge voltage protection | > 33 V |
Voltage drop at max. limiting continuous current | < 200 mV |
Output circuit | 2-conductor, floating |
Protective circuit | Reverse polarity protection |
Surge protection | |
Utilization category CB Scheme (IEC 60947-5-1) | DC12, 3 A/24 V |
Connection method | Screw connection |
Stripping length | 7 mm |
Conductor cross section solid | 0.5 mm² … 4 mm² |
Conductor cross-section solid (2 conductors with same cross section) | 0.5 mm² … 1.5 mm² |
Conductor cross section flexible | 0.5 mm² … 2.5 mm² |
0.5 mm² … 2.5 mm² (Ferrules without plastic sleeve) | |
0.5 mm² … 1.5 mm² (Ferrule with plastic sleeve) | |
Conductor cross section flexible (2 conductors with same cross section) | 0.5 mm² … 1.5 mm² |
0.5 mm² … 1 mm² (TWIN ferrule with plastic sleeve) | |
Conductor cross section AWG | 20 … 12 (solid) |
20 … 14 (flexible) | |
Tightening torque | 0.5 Nm … 0.6 Nm |
Width | 6.2 mm |
Height | 84 mm |
Depth | 68 mm |
Flammability rating according to UL 94 | V2 (Housing) |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C … 60 °C |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Corrosive gas test | |
Identification | ISA-S71.04. G3 Harsh Group |
EN 60068-2-60 |
Air clearances and creepage distances between the power circuits | |
Standards/regulations | DIN EN 60947-5-1 |
Mounting type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting position | any |
Item number | 2905657 |
Packing unit | 10 pc |
Minimum order quantity | 1 pc |
Sales Key | CK6 |
Product Key | CK651K |
Catalog Page | Page 324 (C-5-2019) |
GTIN | 4046356983488 |
Weight per Piece (including packing) | 25.5 g |
Weight per Piece (excluding packing) | 25 g |
Customs tariff number | 85364110 |
Country of origin | HU |
ECLASS
ECLASS-9.0 | 27371604 |
ECLASS-10.0.1 | 27371604 |
ECLASS-11.0 | 27371604 |
ETIM
ETIM 8.0 | EC001504 |
UNSPSC
UNSPSC 21.0 | 39122300 |