Description
PLC interface, with spring-cage connection and plug-in miniature relay, for mounting on DIN rail NS 35/7.5, 1 changeover contact (AU), input voltage 36 V DC
Utilization restriction | |
EMC note | EMC: class A product, see manufacturer’s declaration in the download area |
Product type | Relay Module |
Insulation characteristics | |
Overvoltage category | II |
Pollution degree | 2 |
Insulation | Basic insulation |
Maximum power dissipation for nominal condition | 0.33 W |
Rated insulation voltage | 50 V |
Rated surge voltage | 0.5 kV |
Rated insulation voltage | 260 V |
Rated surge voltage | 2.3 kV |
Rated insulation voltage | 280 V |
Rated surge voltage | 6 kV |
Coil side | |
Nominal input voltage UN | 36 V DC |
Input voltage range | 0 V DC … 0 V DC |
Typical input current at UN | 9.2 mA |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Reverse polarity protection; Polarity protection diode |
Freewheeling diode; Freewheeling diode | |
Operating voltage display | Yellow LED |
Switching | |
Contact type | 1 changeover contact |
Type of switch contact | Single contact |
Drive and function | monostable |
Contact material | Ag alloy, hard gold-plated |
Maximum switching voltage | 30 V AC |
36 V DC | |
Minimum switching voltage | 100 mV |
Limiting continuous current | 50 mA |
Maximum inrush current | 50 mA |
Min. switching current | 1 mA |
Interrupting rating (ohmic load) max. | 1.2 VA (at 24 V DC) |
Switching: when the gold layer is destroyed | |
Note | the following values are applicable if a gold layer is destroyed |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 12 V AC/DC |
Limiting continuous current | 6 A |
Maximum inrush current | 6 A |
Min. switching current | 10 mA |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) |
Coil side | |
Connection method | Spring-cage connection |
Conductor cross section solid | 0.2 mm² … 2.5 mm² |
Conductor cross section flexible | 0.2 mm² … 2.5 mm² |
Conductor cross section AWG | 14 … 24 |
Contact side | |
Connection method | Spring-cage connection |
Conductor cross section solid | 0.2 mm² … 2.5 mm² |
Conductor cross section flexible | 0.2 mm² … 2.5 mm² |
Conductor cross section AWG | 14 … 24 |
Width | 6.2 mm |
Height | 80 mm |
Depth | 94 mm |
Ambient conditions | |
Degree of protection Relay | RT III (Relay) |
Ambient temperature (operation) | -20 °C … 50 °C |
Air clearances and creepage distances, input | |
Standards/regulations | EN 50178 |
Air clearances and creepage distances, output | |
Standards/regulations | EN 50178 |
Air clearances and creepage distances, input/output | |
Standards/regulations | EN 50178 |
Mounting type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting position | any |
Item number | 2900172 |
Packing unit | 10 pc |
Minimum order quantity | 100 pc |
Note | Made to Order (non-returnable) |
Sales Key | CK6 |
Product Key | CK622Y |
GTIN | 4046356484978 |
Weight per Piece (including packing) | 32.87 g |
Weight per Piece (excluding packing) | 32.87 g |
Customs tariff number | 85364190 |
Country of origin | DE |
ECLASS
ECLASS-9.0 | 27371601 |
ECLASS-10.0.1 | 27371601 |
ECLASS-11.0 | 27371601 |
Slim design