Description
PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Freewheeling diode, Input voltage: 24 V DC
| Product type | Relay Module |
| Application | Forcibly guided contacts |
| Operating mode | 100% operating factor |
| Mechanical service life | approx. 107 cycles |
| B10d | 600000 Cycles (AC1; 250 V / 6 A; 1 NO) |
| 900000 Cycles (AC1; 250 V / 3 A; 1 NO) | |
| 1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO) | |
| 180000 Cycles (AC15; 250 V / 3 A; 1 NO) | |
| 560000 Cycles (AC15; 250 V / 2 A; 1 NO) | |
| 4600000 Cycles (AC15; 250 V / 0,75 A; 1 NO) | |
| 360000 Cycles (DC13; 24 V / 3 A; 1 NO) | |
| 740000 Cycles (DC13; 24 V / 1,5 A; 1 NO) | |
| 4200000 Cycles (DC13; 24 V / 0,75 A; 1 NO) | |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 2 |
| Insulation | Safe isolation, reinforced insulation |
| Test voltage Winding/contact | 4 kVrms (50 Hz, 1 min., winding/contact) |
| Test voltage Changeover contact/changeover contact | 2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage | 6 kV |
| Coil side | |
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 20.2 V DC … 32.4 V DC (20 °C) |
| Input voltage range in reference to UN | see diagram |
| Typical input current at UN | 30 mA |
| Typical response time | 10 ms |
| Typical release time | 10 ms |
| Coil voltage | 24 V DC |
| Protective circuit | Freewheeling diode |
| Operating voltage display | Yellow LED |
| Switching | |
| Contact type | 2 changeover contacts, forcibly actuated |
| Type of switch contact | Single contact |
| Drive and function | monostable |
| Drive (polarity) | bipolar |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (10 mA) |
| Limiting continuous current | 6 A |
| Maximum inrush current | 6 A |
| Min. switching current | 10 mA (5 V) |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
| 288 W (48 V DC) | |
| 88 W (110 V DC) | |
| 110 W (220 V DC) | |
| 1500 VA (250 V AC) | |
| Switching capacity min. | 150 mW |
| Switching capacity | 3 A (24 V, DC13) |
| 3 A (230 V, AC15) | |
| Force-guided contacts in accordance with EN 61810-3 | Type B |
| Connection method | Push-in connection |
| Stripping length | 10 mm |
| Conductor cross section solid | 0.14 mm² … 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² … 2.5 mm² |
| 0.2 mm² … 2.5 mm² (Single ferrule) | |
| 2x 0.5 mm² … 1 mm² (TWIN ferrule) | |
| Conductor cross section AWG | 26 … 14 |
| Width | 14 mm |
| Height | 80 mm |
| Depth | 104 mm |
| Ambient conditions | |
| Degree of protection Relay | RT II (Relay) |
| Degree of protection Relay base | IP20 (Relay base) |
| Degree of protection Installation location | ≥ IP54 (Installation location) |
| Ambient temperature (operation) | -20 °C … 60 °C |
| Ambient temperature (storage/transport) | -20 °C … 85 °C |
| Altitude | ≤ 2000 m |
| UL, USA | |
| Identification | UL 508 |
| UL 508 Recognized | |
| UL, USA / Canada | |
| Identification | UL 508 |
| UL 508 Recognized | |
| Corrosive gas test | |
| Identification | ISA-S71.04. G3 Harsh Group |
| EN 60068-2-60 | |
| Standards/regulations | |
| Standards/regulations | IEC 60947-5-1 |
| DIN EN 61810-3 | |
| Mounting type | DIN rail mounting |
| Assembly instructions | in rows with zero spacing |
| Mounting position | any |
| Item number | 2910537 |
| Packing unit | 10 pc |
| Minimum order quantity | 1 pc |
| Sales Key | CK6 |
| Product Key | CK623C |
| Catalog Page | Page 370 (C-5-2019) |
| GTIN | 4055626486055 |
| Weight per Piece (including packing) | 77 g |
| Weight per Piece (excluding packing) | 68 g |
| Customs tariff number | 85364190 |
| Country of origin | DE |
ECLASS
| ECLASS-9.0 | 27371601 |
| ECLASS-10.0.1 | 27371601 |
| ECLASS-11.0 | 27371601 |
ETIM
| ETIM 8.0 | EC001437 |
UNSPSC
| UNSPSC 21.0 | 39122300 |
