Description
Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.
| General | |
| Note | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| Product type | Device circuit breakers |
| Number of slots | 4 |
| Insulation characteristics | |
| Protection class | III |
| Pollution degree | 2 |
| General | |
| Operating voltage | 10 V DC … 30 V DC |
| Rated voltage | 12 V DC |
| 24 V DC | |
| Rated current IN | 45 A DC (Total current input) |
| Rated surge voltage | 0.5 kV |
| Tripping method | E (electronic) |
| Feedback resistance | max. 35 V DC |
| Dielectric strength | 35 V DC (Load circuit) |
| Efficiency | > 99 % |
| Closed circuit current I0 | typ. 85 mA (no load at 24 V) |
| Power dissipation | typ. 2 W (no load at 24 V) |
| < 3.6 W (at 40 A) | |
| Temperature derating | 45 A (Total current at 35°C) |
| 40 A (Total current at 40°C) | |
| 15 A (Total current at 50°C) | |
| MTBF (IEC 61709, SN 29500) | 3985174.15 h (at 25 °C with 21 % load) |
| 1760834.9 h (at 40°C with 34.25% load) | |
| 601892.76 h (at 35 °C with 100 % load) | |
| Voltage drop | 0.048 V (at 40 A) |
| Main circuit IN+ | |
| Connection method | Push-in connection |
| Stripping length | 18 mm |
| Conductor cross section AWG | 20 … 8 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.5 mm² … 16 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.5 mm² … 16 mm² |
| Main circuit IN- | |
| Connection method | Push-in connection |
| Stripping length | 18 mm |
| Conductor cross section AWG | 20 … 8 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.5 mm² … 16 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.5 mm² … 16 mm² |
| System communication | |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.2 mm² … 1.5 mm² |
| Conductor cross section AWG | 24 … 16 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² … 0.75 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² … 1.5 mm² |
| PROFINET | |
| Maximum system extension | ≤ 16 (Modules) |
| Interface type | Ethernet |
| Number | 2 |
| Transmission speed | 100 Mbps (acc. to PROFINET standard) |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Protocols supported | PROFINET |
| PROFINET | |
| Device function | PROFINET device |
| Specification | PROFINET-IO RT/IRT, Spec. 2.x |
| Conformance Class | Conformance-Class C |
| Redundancy | MRP (Media Redundancy Protocol) |
| Connection X1 LED green | lit (connect) |
| Connection X1 LED yellow | lit (traffic) |
| Connection X2 LED green | lit (connect) |
| Connection X2 LED yellow | lit (traffic) |
| PROFINET bus fault (BF) LED red | lit (connection status not available) |
| flashing (сonnection status OK, no communication connection to PROFINET controller) | |
| off (active communication connection to PROFINET controller) | |
| PROFINET group error (SF) LED red | lit (PROFINET error) |
| off (no PROFINET error) | |
| PROFINET ready (RDY) LED green | lit (correct operation) |
| flashing (waiting for application startup) | |
| off (operation not correct) | |
| Power (PWR) LED green | lit (Supply voltage) |
| Power (PWR) LED red | lit (Supply voltage outside the nominal range) |
| Dimensional drawing | |
| Width | 24.8 mm |
| Height | 132.4 mm |
| Depth | 111.3 mm (incl. DIN rail 7.5 mm) |
| Color | light grey RAL 7035 |
| Material | PA 6 (Housing) |
| PA 6 (Pusher) | |
| PA 6 (Release lever) | |
| PC (Fiber optics) | |
| Flammability rating according to UL 94 | V-0 |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -30 °C … 50 °C |
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
| Altitude | ≤ 4000 m (amsl (above mean sea level)) |
| Humidity test | 96 h, 95 % RH, 40 °C |
| Shock (operation) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| 25g (6 ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) | |
| Vibration (operation) | 5g (10 … 150 Hz / 10 cycles / axis / X, Y, Z) |
| UL approval | |
| Identification | UL/C-UL Listed UL 508 |
| UL Recognized UL 2367 | |
| Standards/specifications | EN 61000-6-2 |
| Standards/specifications | EN 61000-6-3 |
| Standards/specifications | EN 60068-2-78 |
| Standards/specifications | EN 50178 |
| Standards/specifications | EN 60068-2-6 |
| Standards/specifications | EN 60068-2-27 |
| Mounting type | pluggable onto CAPAROC CR… current rail |
The benchmark that you can customize by selecting single signals and resets all the way to PROFINET communication|Particularly easy operation for everyone with tool-free assembly, direct feed-in to the busbar, and clear operating states|Exceptionally easy design-in thanks to the comprehensive digital data packet and PROFINET function blocks
