Description
PCB headers, color: black, nominal current: 8 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of rows: 1, number of positions: 8, product range: D32H 2,2/..-V, pitch: 5.08 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 3.8 mm, number of solder pins per potential: 1, plug-in system: CONNEXIS D, Pin connector pattern alignment: Standard, locking: Snap-in locking, mounting: Engagement nose, type of packaging: packed in cardboard
Product line | CONNEXIS Connectors M |
Product type | PCB headers |
Number of positions | 8 |
Pitch | 5.08 mm |
Number of rows | 1 |
Pin layout | Linear pinning |
Solder pins per potential | 1 |
Nominal current IN | 8 A |
Nominal voltage UN | 320 V |
Degree of pollution | 3 |
Contact resistance | 0.9 mΩ |
Rated voltage (III/3) | 250 V |
Rated surge voltage (III/3) | 4 kV |
Rated voltage (III/2) | 320 V |
Rated surge voltage (III/2) | 4 kV |
Mounting type | Wave soldering |
Pin layout | Linear pinning |
Material data – contact | |
Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
Contact material | Cu alloy |
Surface characteristics | Tin-plated |
Metal surface contact area (top layer) | Tin (3 – 5 µm Sn) |
Metal surface contact area (middle layer) | Nickel (1.3 – 3 µm Ni) |
Metal surface soldering area (top layer) | Tin (3 – 5 µm Sn) |
Metal surface soldering area (middle layer) | Nickel (1.3 – 3 µm Ni) |
Material data – housing | |
Color (Housing) | black (9005) |
Insulating material | PBT GF |
Insulating material group | II |
CTI according to IEC 60112 | 400 ≤ CTI |
Flammability rating according to UL 94 | V0 |
Material data – actuating element | |
Color () | () |
Note on the contact | These connectors conform to DIN EN 61984, connectors without switching capacity (COC). When used for their intended purpose, they must not be plugged in or disconnected live or under load. |
Dimensional drawing | |
Pitch | 5.08 mm |
Width [w] | 49.56 mm |
Height [h] | 25.4 mm |
Length [l] | 9.35 mm |
Installed height | 21.6 mm |
Solder pin length [P] | 3.8 mm |
Tensile strength of crimp connections | |
Result | Test passed |
Conductor cross section/conductor type/tractive force setpoint/actual value | AWG 28 / flexible / > 11 N |
Insertion and withdrawal forces | |
Result | Test passed |
No. of cycles | 25 |
Insertion strength per pos. approx. | 4 N |
Withdraw strength per pos. approx. | 4 N |
Contact holder in insert | |
Specification | IEC 60512-15-1:2008-05 |
Contact holder in insert Requirements >20 N |
Test passed |
Resistance of inscriptions | |
Specification | IEC 60068-2-70:1995-12 |
Result | Test passed |
Polarization and coding | |
Specification | IEC 60512-13-5:2006-02 |
Result | Test passed |
Visual inspection | |
Specification | IEC 60512-1-1:2002-02 |
Result | Test passed |
Dimension check | |
Specification | IEC 60512-1-2:2002-02 |
Result | Test passed |
Thermal test | Test group C | |
Specification | IEC 60512-5-1:2002-02 |
Tested number of positions | 10 |
Insulation resistance | |
Specification | IEC 60512-3-1:2002-02 |
Insulation resistance, neighboring positions | > 5 MΩ |
Air clearances and creepage distances | | |
Specification | IEC 60664-1:2020-05 |
Insulating material group | II |
Comparative tracking index (IEC 60112) | CTI ≥400 to <600 |
Rated insulation voltage (III/3) | 250 V |
Rated surge voltage (III/3) | 4 kV |
minimum clearance value – non-homogenous field (III/3) | 3 mm |
minimum creepage distance (III/3) | 3.6 mm |
Rated insulation voltage (III/2) | 320 V |
Rated surge voltage (III/2) | 4 kV |
minimum clearance value – non-homogenous field (III/2) | 3 mm |
minimum creepage distance (III/2) | 3 mm |
Rated insulation voltage (II/2) | 600 V |
Rated surge voltage (II/2) | 4 kV |
minimum clearance value – non-homogenous field (II/2) | 3 mm |
minimum creepage distance (II/2) | 4.5 mm |
Vibration test | |
Specification | IEC 60068-2-6:2007-12 |
Frequency | 10 – 150 – 10 Hz |
Sweep speed | 1 octave/min |
Amplitude | 0.35 mm (10 Hz … 60.1 Hz) |
Sweep speed | 50 m/s² (60.1 Hz … 150 Hz) |
Test duration per axis | 2.5 h |
Durability test | |
Specification | IEC 60512-9-1:2010-03 |
Impulse withstand voltage at sea level | 4.8 kV |
Contact resistance R1 | 0.9 mΩ |
Contact resistance R2 | 1 mΩ |
Insertion/withdrawal cycles | 25 |
Climatic test | |
Specification | ISO 6988:1985-02 |
Corrosive stress | 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle |
Thermal stress | 105 °C/168 h |
Power-frequency withstand voltage | 2.21 kV |
Shocks | |
Specification | IEC 60068-2-27:2008-02 |
Pulse shape | Half-sine |
Acceleration | 30g |
Shock duration | 11 ms |
Test directions | X-, Y- and Z-axis (pos. and neg.) |
Ambient conditions | |
Ambient temperature (operation) | -55 °C … 105 °C (dependent on the derating curve) |
Ambient temperature (storage/transport) | -40 °C … 70 °C |
Relative humidity (storage/transport) | 30 % … 70 % |
Ambient temperature (assembly) | -5 °C … 100 °C |
Type of packaging | packed in cardboard |
Item number | 1376551 |
Packing unit | 50 pc |
Minimum order quantity | 50 pc |
Note | Made to Order (non-returnable) |
Product Key | AACSUA |
GTIN | 4063151741341 |
Weight per Piece (including packing) | 12.909 g |
Weight per Piece (excluding packing) | 12.656 g |
Country of origin | CN |
ECLASS
ECLASS-9.0 | 27440402 |
ECLASS-10.0.1 | 27440402 |
ECLASS-11.0 | 27460201 |
Well-known mounting principle allows worldwide use|Vertical connection enables multi-row arrangement on the PCB|Easy PCB replacement thanks to plug-in modules|Intuitive locking mechanism prevents accidental disconnection