Description
Output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals to a load in the safe area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.
| Product type | Output signal conditioner |
| Type | Signal conditioners with SIL functional safety |
| Configuration | DIP switches |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
| Electrical isolation | 3-way isolation |
| Signal transmission behavior | In = Out |
| Step response (10-90%) | < 140 µs (for 4 mA … 20 mA step) |
| Maximum temperature coefficient | 0.01 %/K |
| Temperature coefficient, typical | ≤ 0.005 %/K |
| Maximum transmission error | 0.1 % (of final value) |
| Transmission error, typical | ≤ 0.05 % (of final value) |
| Electrical isolation Input/output | |
| Rated insulation voltage | 300 Vrms |
| Test voltage | 2.5 kV AC (50 Hz, 60 s) |
| Insulation | Safe isolation in accordance with IEC/EN 61010-1 |
| Altitude | ≤ 2000 m |
| Electrical isolation Input/power supply | |
| Rated insulation voltage | 50 Vrms |
| Test voltage | 1.5 kV AC (50 Hz, 60 s) |
| Insulation | Basic insulation in accordance with IEC/EN 61010-1 |
| Altitude | ≤ 2000 m |
| Electrical isolation Output/supply | |
| Rated insulation voltage | 300 Vrms |
| Test voltage | 2.5 kV AC (50 Hz, 60 s) |
| Insulation | Safe isolation in accordance with IEC/EN 61010-1 |
| Altitude | ≤ 2000 m |
| Electrical isolation Input 1/input 2, output 1/output 2 | |
| Test voltage | 1.5 kV AC (50 Hz, 60 s) |
| Altitude | ≤ 2000 m |
| Supply | |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC … 30 V DC (24 V DC, -20 % … +25 %) |
| Max. current consumption | < 45 mA (at 24 V DC / 20 mA) |
| Power dissipation | < 0.8 W (at 24 V DC / 20 mA) |
| Power consumption | ≤ 1.1 W (at 24 V DC / 20 mA) |
| Signal: Current | |
| Current input signal | 0 mA … 20 mA (Function (short-circuit detection off)) |
| 0.2 mA … 20 mA (Function (short-circuit detection on)) | |
| 4 mA … 20 mA (Safety) | |
| 0 mA … 24 mA (Underload/overload range) | |
| Input current | ≤ 30 mA |
| Input impedance | > 1 MΩ (If there is a line fault) |
| Line fault detection | > 0.2 mA (Response threshold of input current) |
| Voltage drop | < 2.4 V (at 20 mA) |
| Signal: Current | |
| Current output signal | 0 mA … 20 mA (Function (short-circuit detection off)) |
| 0.2 mA … 20 mA (Function (short-circuit detection on)) | |
| 4 mA … 20 mA (Safety) | |
| 0 mA … 24 mA (Underload/overload range) | |
| Load | 100 Ω … 700 Ω (20 mA (short-circuit detection on)) |
| 100 Ω … 650 Ω (20.5 mA (short-circuit detection on)) | |
| 100 Ω … 500 Ω (24 mA (short-circuit detection on)) | |
| 0 Ω … 700 Ω (20 mA (short-circuit detection off)) | |
| 0 Ω … 650 Ω (20.5 mA (short-circuit detection off)) | |
| 0 Ω … 500 Ω (24 mA (short-circuit detection off)) | |
| Output ripple | < 20 mVrms |
| Non-load voltage | ≤ 27 V |
| Line fault detection | > 10 kΩ (Line break) |
| < 50 Ω (Short circuit) | |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.2 mm² … 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² … 1.5 mm² |
| Conductor cross section AWG | 24 … 16 |
| COMBICON connection | |
| Max. diameter | 2 mm |
| Data communication (bypass) | |
| HART function | Yes |
| Protocols supported | HART-transparent |
| Status display | Green LED (supply voltage) |
| Functionality | |
| Configuration | DIP switches |
| Width | 12.5 mm |
| Height | 116 mm |
| Depth | 113.7 mm |
| Depth NS 35/7,5 | 114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715) |
| Flammability rating according to UL 94 | V0 (Housing) |
| Housing material | PA 6.6-FR |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C … 70 °C (Any mounting position) |
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Permissible humidity (operation) | 5 % … 95 % (non-condensing) |
| Altitude range (≤ 2000 m (Ex)) | |
| Description | Ex applications |
| Altitude | ≤ 2000 m (For use at altitudes ≥2000 m above sea level, see data sheet.) |
| Ambient temperature (operation) | -40 °C … 70 °C |
| Rated insulation voltage | 320 V (Power supply, input / output) |
| Altitude range (≤ 3000 m (Ex)) | |
| Description | Ex applications |
| Height range | > 2000 m … 3000 m |
| Ambient temperature (operation) | -40 °C … 60 °C |
| Rated insulation voltage | 190 V (Power supply, input / output) |
| Altitude range (≤ 4000 m (Ex)) | |
| Description | Ex applications |
| Height range | > 3000 m … 4000 m |
| Ambient temperature (operation) | -40 °C … 55 °C |
| Rated insulation voltage | 63 V (Power supply, input / output) |
| Altitude range (≤ 5000 m (Ex)) | |
| Description | Ex applications |
| Height range | > 4000 m … 5000 m |
| Ambient temperature (operation) | -40 °C … 45 °C |
| Rated insulation voltage | 63 V (Power supply, input / output) |
| Altitude range (≤ 2000 m) | |
| Description | Non-Ex applications (EN 61010-1) |
| Altitude | ≤ 2000 m (For use at altitudes ≥2000 m above sea level, see data sheet.) |
| Ambient temperature (operation) | -40 °C … 70 °C |
| Rated insulation voltage | 300 V (Power supply, input / output) |
| Altitude range (≤ 3000 m) | |
| Description | Non-Ex applications (EN 61010-1) |
| Height range | > 2000 m … 3000 m |
| Ambient temperature (operation) | -40 °C … 60 °C |
| Rated insulation voltage | 150 V (Power supply, input / output) |
| Altitude range (≤ 4000 m) | |
| Description | Non-Ex applications (EN 61010-1) |
| Height range | > 3000 m … 4000 m |
| Ambient temperature (operation) | -40 °C … 55 °C |
| Rated insulation voltage | 150 V (Power supply, input / output) |
| Altitude range (≤ 5000 m) | |
| Description | Non-Ex applications (EN 61010-1) |
| Height range | > 4000 m … 5000 m |
| Ambient temperature (operation) | -40 °C … 45 °C |
| Rated insulation voltage | 150 V (Power supply, input / output) |
| CE | |
| Certificate | CE-compliant |
| Note | and EN 61326 |
| ATEX | |
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | BVS 20 ATEX E 003 X |
| UKCA Ex (UKEX) | |
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF21UKEx2908065X |
| IECEx | |
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx BVS 20.0003X |
| CCC / China-Ex | |
| Identification | Ex nA IIC T4 Gc |
| INMETRO | |
| Identification | Ex ec IIC T4 Gc |
| Certificate | DNV 21.0092 X |
| UL, USA / Canada | |
| Identification | UL 61010 Listed |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| Class I, Zone 2, Group IIC T4 | |
| Shipbuilding approval | |
| Certificate | DNV GL TAA00000AG |
| EAC | |
| Identification | 2Ex e IIC T4 Gc X |
| Certificate | RU C-DE.HB49.B.00145/21 |
| Safety Integrity Level (SIL, IEC 61508) | |
| Identification | 2 |
| Systematic Capability | |
| Identification | 3 |
| DNV GL data | |
| Temperature | B |
| Humidity | B |
| Vibration | A |
| EMC | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
ECLASS
| ECLASS-9.0 | 27210120 |
| ECLASS-10.0.1 | 27210120 |
| ECLASS-11.0 | 27210120 |
ETIM
| ETIM 8.0 | EC002653 |
UNSPSC
| UNSPSC 21.0 | 39121000 |
