Description
Installation ground terminal block, Current and voltage are determined by the plug used., nom. voltage: 400 V, nominal current: 24 A, Push-in connection, Rated cross section: 4 mm2, cross section: 0.14 mm2 – 4 mm2, Push-in connection, Rated cross section: 1.5 mm2, cross section: 0.14 mm2 – 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray
General | Current and voltage are determined by the plug used. |
Product type | Ground terminal block |
Number of connections | 5 |
Number of rows | 3 |
Potentials | 2 |
Insulation characteristics | |
Overvoltage category | III |
Degree of pollution | 3 |
Rated surge voltage | 4 kV |
6 kV | |
Maximum power dissipation for nominal condition | 1.02 W |
Grounding foot | Yes |
Number of connections per level | 2 |
Nominal cross section | 4 mm² |
Level 1+2 | |
Note | Please observe the current carrying capacity of the DIN rails. |
Stripping length | 8 mm … 10 mm |
Internal cylindrical gage | A3 |
Conductor cross section solid | 0.14 mm² … 4 mm² |
Cross section AWG | 26 … 12 (converted acc. to IEC) |
Conductor cross section flexible | 0.14 mm² … 4 mm² |
Conductor cross section, flexible [AWG] | 26 … 12 (converted acc. to IEC) |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 0.14 mm² … 2.5 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) | 0.14 mm² … 2.5 mm² |
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² |
Nominal current | 24 A (with 4 mm² conductor cross section) |
Maximum load current | 30 A (with 4 mm² conductor cross section and 3-pos. terminal block) |
Nominal voltage | 400 V (phase conductor/phase conductor) |
250 V (phase conductor/PE) | |
phase conductor/N | |
Nominal cross section | 4 mm² |
Level 3 | |
Stripping length | 8 mm … 10 mm |
Conductor cross section solid | 0.14 mm² … 4 mm² |
Cross section AWG | 26 … 12 (converted acc. to IEC) |
Conductor cross section flexible | 0.14 mm² … 4 mm² |
Conductor cross section, flexible [AWG] | 26 … 12 (converted acc. to IEC) |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 0.14 mm² … 2.5 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) | 0.14 mm² … 2.5 mm² |
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² |
Nominal current | 16 A |
Maximum load current | 16 A (with 4 mm² conductor cross section) |
Nominal voltage | 250 V |
Nominal cross section | 1.5 mm² |
Level 1+2 Connection cross sections directly pluggable | |
Conductor cross section solid | 0.34 mm² … 4 mm² |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 0.34 mm² … 2.5 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) | 0.34 mm² … 2.5 mm² |
Level 3 Connection cross sections directly pluggable | |
Conductor cross section solid | 0.34 mm² … 4 mm² |
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 0.34 mm² … 2.5 mm² |
Flexible conductor cross section (ferrule with plastic sleeve) | 0.34 mm² … 2.5 mm² |
Width | 5.2 mm |
End cover width | 2.2 mm |
Height NS 35/15 | 58 mm |
Height NS 35/7,5 | 50.5 mm |
Length | 101 mm |
Color | gray |
Flammability rating according to UL 94 | V0 |
Insulating material group | I |
Insulating material | PA |
Static insulating material application in cold | -60 °C |
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 125 °C |
Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 – HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 – HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 – HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 – HL 3 |
Calorimetric heat release NFPA 130 (ASTM E 1354) | 27,5 MJ/kg |
Surface flammability NFPA 130 (ASTM E 162) | passed |
Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
Surge voltage test | |
Test voltage setpoint | 7.3 kV |
Result | Test passed |
Temperature-rise test | |
Requirement temperature-rise test | Increase in temperature ≤ 45 K |
Result | Test passed |
Short-time withstand current 4 mm² | 0.48 kA |
Short-time withstand current 1.5 mm² | 0.18 kA |
Result | Test passed |
Power-frequency withstand voltage | |
Test voltage setpoint | 1.89 kV |
Result | Test passed |
Mechanical data | |
Open side panel | Yes |
Mechanical strength | |
Result | Test passed |
Attachment on the carrier | |
DIN rail/fixing support | NS 35 |
Test force setpoint | 1 N |
Result | Test passed |
Test for conductor damage and slackening | |
Rotation speed | 10 rpm |
Revolutions | 135 |
Conductor cross section/weight | 0.14 mm² / 0.2 kg |
4 mm² / 0.9 kg | |
Result | Test passed |
Aging | |
Temperature cycles | 192 |
Result | Test passed |
Needle-flame test | |
Time of exposure | 30 s |
Result | Test passed |
Oscillation/broadband noise | |
Specification | DIN EN 50155 (VDE 0115-200):2008-03 |
Spectrum | Service life test category 1, class B, body mounted |
Frequency | f1 = 5 Hz to f2 = 150 Hz |
ASD level | 1.857 (m/s²)²/Hz |
Acceleration | 0.8g |
Test duration per axis | 5 h |
Test directions | X-, Y- and Z-axis |
Result | Test passed |
Shocks | |
Specification | DIN EN 50155 (VDE 0115-200):2008-03 |
Pulse shape | Half-sine |
Acceleration | 5g |
Shock duration | 30 ms |
Number of shocks per direction | 3 |
Test directions | X-, Y- and Z-axis (pos. and neg.) |
Result | Test passed |
Ambient conditions | |
Ambient temperature (operation) | -60 °C … 105 °C (max. short-term operating temperature RTI Elec.) |
Ambient temperature (storage/transport) | -25 °C … 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
Ambient temperature (assembly) | -5 °C … 70 °C |
Permissible humidity (storage/transport) | 30 % … 70 % |
Mounting type | NS 35/7,5 |
NS 35/15 |
Item number | 3213960 |
Packing unit | 50 pc |
Minimum order quantity | 50 pc |
Sales Key | BE2 |
Product Key | BE2253 |
Catalog Page | Page 77 (C-1-2019) |
GTIN | 4046356609579 |
Weight per Piece (including packing) | 18.528 g |
Weight per Piece (excluding packing) | 18.5 g |
Customs tariff number | 85369010 |
Country of origin | DE |
ECLASS
ECLASS-9.0 | 27141125 |
ECLASS-10.0.1 | 27141125 |
ECLASS-11.0 | 27141125 |
ECLASS-12.0 | 27141125 |
ETIM
ETIM 8.0 | EC001329 |
UNSPSC
UNSPSC 21.0 | 39121400 |
Double function shafts on all levels|The terminal blocks with knife disconnect zone in the upper level meet the safety requirement regarding individual circuit isolation of DIN VDE 0100-718