Description
PCB connector, color: black, nominal current: 8 A, rated voltage (III/2): 160 V, type of contact: Male connector, number of rows: 1, number of positions: 3, product range: D31H 2,2/..-PT, pitch: 3.81 mm, connection method: Crimp connection, conductor/PCB connection direction: 0 °, locking clip: – without locking clip, plug-in system: CONNEXIS D, locking: Snap-in locking, mounting: Engagement nose, type of packaging: packed in cardboard
Product line | CONNEXIS Connectors S |
Product type | PCB plug |
Number of positions | 3 |
Pitch | 3.81 mm |
Number of rows | 1 |
Nominal current IN | 8 A |
Nominal voltage UN | 160 V |
Degree of pollution | 3 |
Contact resistance | 5 mΩ |
Rated voltage (III/3) | 160 V |
Rated surge voltage (III/3) | 2.5 kV |
Rated voltage (III/2) | 160 V |
Rated surge voltage (III/2) | 2.5 kV |
Interlock | |
Locking type | Snap-in locking |
Mounting flange | Engagement nose |
Conductor connection | |
Connection method | Crimp connection |
Conductor/PCB connection direction | 0 ° |
Conductor cross section AWG | 28 … 14 |
Material data – housing | |
Color (Housing) | black (9005) |
Insulating material | PBT GF |
Insulating material group | II |
CTI according to IEC 60112 | 400 ≤ CTI |
Flammability rating according to UL 94 | V0 |
Material data – actuating element | |
Color () | () |
Dimensional drawing | |
Pitch | 3.81 mm |
Width [w] | 40 mm |
Height [h] | 12.7 mm |
Length [l] | 33.6 mm |
Note on the contact | These connectors conform to DIN EN 61984, connectors without switching capacity (COC). When used for their intended purpose, they must not be plugged in or disconnected live or under load. |
Note on application | All laboratory tests are performed in combination with the crimp contacts specified as accessories. |
Note on application | The current depends on the crimp contact and conductor cross section used. |
Note on application | The corresponding crimp contacts are to be found in the “Accessories” tab. |
Tensile strength of crimp connections | |
Result | Test passed |
Conductor cross section/conductor type/tractive force setpoint/actual value | AWG 28 / flexible / > 11 N |
Insertion and withdrawal forces | |
Result | Test passed |
No. of cycles | 25 |
Insertion strength per pos. approx. | 6 N |
Withdraw strength per pos. approx. | 6 N |
Contact holder in insert | |
Specification | IEC 60512-15-1:2008-05 |
Contact holder in insert Requirements >20 N |
Test passed |
Resistance of inscriptions | |
Specification | IEC 60068-2-70:1995-12 |
Result | Test passed |
Polarization and coding | |
Specification | IEC 60512-13-5:2006-02 |
Result | Test passed |
Visual inspection | |
Specification | IEC 60512-1-1:2002-02 |
Result | Test passed |
Dimension check | |
Specification | IEC 60512-1-2:2002-02 |
Result | Test passed |
Vibration test | |
Specification | IEC 60068-2-6:2007-12 |
Frequency | 10 – 150 – 10 Hz |
Sweep speed | 1 octave/min |
Amplitude | 0.35 mm (10 Hz … 60.1 Hz) |
Sweep speed | 50 m/s² (60.1 Hz … 150 Hz) |
Test duration per axis | 2.5 h |
Durability test | |
Specification | IEC 60512-9-1:2010-03 |
Impulse withstand voltage at sea level | 2.95 kV |
Contact resistance R1 | 5 mΩ |
Contact resistance R2 | 5 mΩ |
Insertion/withdrawal cycles | 25 |
Climatic test | |
Specification | ISO 6988:1985-02 |
Corrosive stress | 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle |
Thermal stress | 105 °C/168 h |
Power-frequency withstand voltage | 1.39 kV |
Ambient conditions | |
Ambient temperature (operation) | -55 °C … 105 °C (dependent on the derating curve) |
Ambient temperature (storage/transport) | -40 °C … 70 °C |
Relative humidity (storage/transport) | 30 % … 70 % |
Ambient temperature (assembly) | -5 °C … 100 °C |
Thermal test | Test group C | |
Specification | IEC 60512-5-1:2002-02 |
Tested number of positions | 10 |
Insulation resistance | |
Specification | IEC 60512-3-1:2002-02 |
Insulation resistance, neighboring positions | > 5 MΩ |
Air clearances and creepage distances | | |
Specification | IEC 60664-1:2007-04 |
Insulating material group | II |
Comparative tracking index (IEC 60112) | CTI ≥400 to <600 |
Rated insulation voltage (III/3) | 160 V |
Rated surge voltage (III/3) | 2.5 kV |
minimum clearance value – non-homogenous field (III/3) | 1.5 mm |
minimum creepage distance (III/3) | 2.2 mm |
Rated insulation voltage (III/2) | 160 V |
Rated surge voltage (III/2) | 2.5 kV |
minimum clearance value – non-homogenous field (III/2) | 1.5 mm |
minimum creepage distance (III/2) | 1.5 mm |
Rated insulation voltage (II/2) | 320 V |
Rated surge voltage (II/2) | 2.5 kV |
minimum clearance value – non-homogenous field (II/2) | 1.5 mm |
minimum creepage distance (II/2) | 2.2 mm |
Type of packaging | packed in cardboard |
Item number | 1341133 |
Packing unit | 50 pc |
Minimum order quantity | 50 pc |
Note | Made to Order (non-returnable) |
Product Key | AABCUD |
GTIN | 4063151649166 |
Weight per Piece (including packing) | 6.973 g |
Weight per Piece (excluding packing) | 5.59 g |
Country of origin | CN |
ECLASS
ECLASS-9.0 | 27440309 |
ECLASS-10.0.1 | 27440309 |
ECLASS-11.0 | 27460202 |
Cost-effective connection of crimped conductors in large quantities|Small component size for applications where space is at a premium|Intuitive locking mechanism prevents accidental disconnection|Tools for automatic crimping available as an option