Description
Gigabit Ethernet extender, network extension via twisted pair cable up to 1 kilometer and bandwidth up to 1 Gbps, Power over Link (PoL) function for the power supply of additional devices via the twisted pair cable
Product type | Ethernet extenders |
MTTF | 291 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
141 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
59 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) | |
Insulation characteristics | |
Pollution degree | 2 |
Electrical isolation | VCC (US+GND) // Ethernet (PoE) // G.hn (without PoL) // FE |
Mains type | Permanent line |
Test voltage data interface/power supply | 1.5 kV AC (50 Hz, 1 min.) |
Supply | |
Supply voltage range | 18 V DC … 57 V DC |
Nominal supply voltage | 24 V DC |
48 V DC | |
Power consumption | ≤ 107.5 W (Total, with PoL) |
Protective circuit | Overload protection, protection against polarity reversal; Internal device protection: 2x 5 AF, internal series diode |
Connection method | Push-in spring connection |
Supply | |
Connection method | Push-in spring connection |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² … 4 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² … 4 mm² |
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² … 1.5 mm² |
Conductor cross section, flexible | 0.20 mm² … 6.00 mm² |
Conductor cross section, rigid | 1.00 mm² … 6.00 mm² |
Conductor cross section, flexible [AWG] | 24 … 10 |
Stripping length | 10 mm |
Basic functions | Gigabit Ethernet extender in accordance with ITU G.9960 |
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3 | |
Serial transmission speed | 10/100/1000 Mbps |
Connection method | RJ45 jack, shielded |
No. of channels | 1 |
Transmission length | < 100 m (shielded twisted pair) |
Protocols supported | Protocol-transparent for TCP/IP, IPv4, and IPv6 |
Data: G.hn interface in accordance with ITU G.9960 | |
Transmission speed | ≤ 1000 Mbps (Depending on the quality of the data line) |
Connection method | Push-in spring connection |
Transmission length | ≤ 1000 m (Depending on the quality of the data line) |
Conductor cross section flexible max. | 6 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² … 4 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² … 4 mm² |
Conductor cross section solid max. | 6 mm² |
Conductor cross section solid min. | 1 mm² |
Max. AWG conductor cross section, flexible | 10 |
Min. AWG conductor cross section, flexible | 24 |
Stripping length | 10 mm |
Transmission method | QAM (quadrature amplitude modulation) carrier frequency method |
Output nominal voltage | ≤ 60 V DC |
Output power | ≤ 74 W (With PoL) |
Functionality | |
Basic functions | Gigabit Ethernet extender in accordance with ITU G.9960 |
Width | 23 mm |
Height | 101 mm |
Depth | 115 mm |
Material | PA 6.6-FR (Housing) |
Flammability rating according to UL 94 | V0 |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -40 °C … 60 °C (>55°C derating, see technical documentation) |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Altitude | ≤ 2000 m |
Permissible humidity (operation) | 10 % … 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % … 95 % (non-condensing) |
CE | |
Certificate | CE-compliant |
Corrosive gas test | |
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 61000-6-4, Class A, industrial area of application |
Noise immunity | EN 55035 |
Electrostatic discharge | |
Standards/regulations | EN 61000-4-2 |
Electrostatic discharge | |
Contact discharge | ± 6 kV |
Discharge in air | ± 8 kV |
Indirect discharge | ± 6 kV |
Comments | Criterion B |
Electromagnetic HF field | |
Standards/regulations | EN 61000-4-3 |
Electromagnetic HF field | |
Frequency range | 80 MHz … 3 GHz (80% amplitude modulation with 1 kHz) |
Field intensity | 10 V/m |
Frequency range | 3 GHz … 6 GHz (80% amplitude modulation with 1 kHz) |
Field intensity | 3 V/m |
Comments | Criterion A |
Fast transients (burst) | |
Standards/regulations | EN 61000-4-4 |
Fast transients (burst) | |
Input | ± 2.2 kV |
Signal | ± 2.2 kV (Ethernet, G.hn) |
Surge current load (surge) | |
Standards/regulations | EN 61000-4-5 |
Surge current load (surge) | |
Input | ± 0.5 kV (Symmetrical, unshielded supply line) |
± 1 kV (Asymmetrical, unshielded supply line) | |
Signal | ± 1 kV (Ethernet signal / asymmetrical: shielded Ethernet cable) |
± 4 kV (Ethernet signal / asymmetrical: cable to ground, unshielded G.hn cable) | |
± 2 kV (Ethernet signal / symmetrical: cable to cable, unshielded G.hn cable) | |
± 4 kV () | |
± 1 kV () | |
Comments | Criterion B |
Conducted interference | |
Standards/regulations | EN 61000-4-6 |
Conducted interference | |
Frequency range | 0.15 MHz … 80 MHz (80% amplitude modulation with 1 kHz) |
Comments | Criterion A |
Voltage | 10 V |
Criteria | |
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Item number | 1319321 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Sales Key | DNC |
Product Key | DNC361 |
GTIN | 4063151604721 |
Weight per Piece (including packing) | 208 g |
Weight per Piece (excluding packing) | 145 g |
ECLASS
ECLASS-9.0 | 19060590 |
ECLASS-10.0.1 | 19060590 |
ECLASS-11.0 | 19170407 |
ETIM
ETIM 8.0 | EC000309 |
UNSPSC
UNSPSC 21.0 | 43223100 |