Description
Device connector, rear mounting, 5-position, Socket, straight, M12-SPEEDCON, A-coded, Rear mounting, Pg9, Solder pins item no.: 1237424
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Mounting type | Rear mounting Pg9 With flat nut |
| Assembly instructions | With flat nut |
| Product type | Circular connectors (device side) |
| Number of positions | 5 |
| Shielded | yes |
| Coding | A – standard |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Length of the solder pin | 6 mm |
| 6 mm |
| Flammability rating according to UL 94 | V0 |
| Sealing material | NBR |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Rated surge voltage | 1.5 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 60 V |
| Nominal current IN | 4 A |
| Conductor connection | |
| Connection method | Solder pins |
| Tightening torque | 2 Nm |
| 3 Nm | |
| Connection 1 | |
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | A-coded |
| Ambient temperature (operation) | -40 °C … 85 °C (cable, fixed installation) |
| -25 °C … 85 °C (Cable, flexible installation) |
| Ambient conditions | |
| Degree of protection | IP67 (When plugged in) |
| IP65 (When plugged in) | |
| Degree of protection | IP65/IP67 |
| Ambient temperature (operation) | -25 °C … 85 °C (Plug / socket) |
| -40 °C … 85 °C (without mechanical actuation) | |
| -25 °C … 85 °C (Cable, flexible installation) | |
| -40 °C … 85 °C (cable, fixed installation) | |
| M12 | |
| Standards/specifications | IEC 61076-2-101 |
Easy PCB assembly: one-piece connectors for wave soldering|All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design|SPEEDCON fast locking system reduces cabling times|For high transmission reliability: optional shield connection to the housing by means of shield contact
