Description
QUINT capacity module, with maintenance-free energy storage based on double-layer capacitor, DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A / 16 kJ incl. mounted UTA 107 universal DIN rail adapter
Product type | Capacity module |
MTBF (IEC 61709, SN 29500) | 1351036 h (25 °C) |
903325 h (40 °C) | |
470143 h (60 °C) | |
Insulation characteristics | |
Protection class | III (Special application (SELV)) |
Overvoltage category | II |
Degree of pollution | 2 |
Insulation voltage input, output / housing | 500 V |
Input voltage | 24 V DC (SELV) |
Input voltage range | 22.5 V DC … 30 V DC |
Fixed backup threshold | < 22 V DC |
> 30 V DC | |
Current consumption IN (UN, IOUT = IN, Icharge = 0) | 20 A |
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) | 30 A |
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) | 0.1 A (No-load) |
Current consumption Icharge (UN, IOUT = 0, Icharge = max) | 10 A (charging process) |
Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max) | 599 W |
Power consumption PN (UN, IOUT = IN, Icharge = 0) | 488 W |
Power consumption Pcharge (UN, IOUT = 0, Icharge = max) | 244 W |
Buffer time | 4 min. (2.5 A) |
30 s (20 A) | |
Charging time | approx. 6.3 min. (2.5 A) |
approx. 2.1 min. (10 A) | |
Recharging time | approx. 5.4 min. (2.5 A) |
approx. 1.4 min. (10 A) | |
Inrush current | ≤ 7 A (≤ 4 ms) |
Switch-on time | 1 ms (buffer mode) |
Internal input fuse | no |
Dielectric strength | max. 35 V DC (Reverse polarity protection) |
Voltage drop, input/output | 0.5 V DC |
Signal state Parallel port | |
Connection labeling | 3.6 |
Channel | DI / DO (digital input / digital output) |
Switching voltage | < 1 V |
24 V (UN – 1 V (typical)) | |
Switching input description | Connection terminal block communication, parallel operation |
State (configurable) | Parallel Mode |
State condition (configurable) | Not active: none Active: Output: buffer mode <1 V Output: mains operation 24 V (UN-1 V (typical)) Input: Connected with SGnd: start buffer mode |
Current carrying capacity | 3 mA |
Reference potential | Different device, parallel port IN/OUT |
Signal state Remote | |
Connection labeling | 3.5 |
Channel | DI (digital input) |
State (configurable) | Remote |
State condition | Remote |
Low signal | Connection to SGnd with |
High signal | Open |
Signal – state assignment | low – active |
Reference potential | 3.7 (SGnd, identical to1.3, 1.4, 2.2) |
Efficiency | > 98 % (with charged energy storage device) |
Connection in parallel | yes |
Connection in parallel | max. 4 |
Connection in series | No |
Mains operation | |
Output voltage | 24 V DC |
Output current IN | 20 A |
Static Boost (IStat.Boost) | 25 A |
Output power POUT (UN, IOUT = IN) | 480 W |
Output power POUT (UN, IOUT = Istat.Boost) | 600 W |
Power dissipation No load (UN, IOut = 0, ICharge = 0) | 5 W |
Power dissipation Nominal load (UN, IOut = IN, ICharge = 0) | 10 W |
Short-circuit-proof | yes (with input fuse) |
Idling-proof | yes |
Battery operation | |
Output voltage | 24 V DC |
Output current IN | 20 A |
Static Boost (IStat.Boost) | 25 A |
Output power POUT (UN, IOUT = IN) | 480 W |
Output power POUT (UN, IOUT = Istat.Boost) | 600 W |
Power dissipation No load (UN, IOut = 0, ICharge = 0) | 5 W |
Power dissipation Nominal load (UN, IOut = IN, ICharge = 0) | 90 W |
Short-circuit-proof | yes |
Idling-proof | yes |
Signal state Alarm | |
Connection labeling | 3.3 |
Channel | DO (digital output) |
Switching output | Transistor |
State (configurable) | Group alarm |
State condition (configurable) | Alarm threshold |
Output voltage | 25 V (UN – 1 V (typical)) |
Output can be loaded | max. 20 mA |
State – signal assignment | active – low |
Reference potential | 3.7 (SGnd, identical to1.3, 1.4, 2.2) |
LED status indicator | red (Alarm) |
Signal state Ready | |
Connection labeling | 3.4 |
Channel | DO (digital output) |
Switching output | Transistor |
State (configurable) | Ready |
State condition (configurable) | State of charge = 100% or buffer mode |
Output voltage | 25 V (UN – 1 V (typical)) |
Output can be loaded | max. 20 mA |
State – signal assignment | active – high |
Reference potential | 3.7 (SGnd, identical to1.3, 1.4, 2.2) |
LED status indicator | Green (state of charge – SOC) |
Signal state UIN OK | |
Connection labeling | 3.1, 3.2 |
Channel | DO (digital output) |
Switching output | Electronic relays (OptoMOS) |
State (configurable) | UIn OK |
State condition (configurable) | UIn > 22,5 V DC, UIn |
Output voltage | max. 30 V |
Output can be loaded | 300 mA |
State – signal assignment | active – high |
LED status indicator | green (UIn OK) |
Signal ground SGnd | |
Connection labeling | 3.7 |
Switching voltage | 0 V |
Current carrying capacity | max. 60 mA |
Function | Signal ground |
Reference potential | 3.3 Alarm, 3.4 Ready, 3.5 Remote |
Capacity | 16 kJ |
Buffer time | 4 min. (2.5 A) |
30 s (20 A) | |
Storage medium | Double-layer capacitor |
Input | |
Position | 1.x |
Conductor connection | |
Connection method | Screw connection |
rigid | 0.2 mm² … 6 mm² |
flexible | 0.2 mm² … 4 mm² |
flexible with ferrule without plastic sleeve | 0.25 mm² … 4 mm² |
flexible with ferrule with plastic sleeve | 0.25 mm² … 4 mm² |
rigid (AWG) | 24 … 10 |
Stripping length | 8 mm |
Tightening torque | 0.5 Nm … 0.6 Nm |
Drive form screw head | Slotted L |
2-conductor connection | |
rigid | 0.2 mm² … 1.5 mm² |
flexible | 0.2 mm² … 1.5 mm² |
flexible with TWIN ferrule with plastic sleeve | 0.5 mm² … 2.5 mm² |
Output | |
Position | 2.x |
Conductor connection | |
Connection method | Screw connection |
rigid | 0.2 mm² … 6 mm² |
flexible | 0.2 mm² … 4 mm² |
flexible with ferrule without plastic sleeve | 0.25 mm² … 4 mm² |
flexible with ferrule with plastic sleeve | 0.25 mm² … 4 mm² |
rigid (AWG) | 24 … 10 |
Stripping length | 8 mm |
Tightening torque | 0.5 Nm … 0.6 Nm |
Drive form screw head | Slotted L |
2-conductor connection | |
rigid | 0.2 mm² … 1.5 mm² |
flexible | 0.2 mm² … 1.5 mm² |
flexible with TWIN ferrule with plastic sleeve | 0.5 mm² … 2.5 mm² |
Signal | |
Position | 3.x |
Conductor connection | |
Connection method | Push-in connection |
rigid | 0.2 mm² … 1 mm² |
flexible | 0.2 mm² … 1.5 mm² |
flexible with ferrule without plastic sleeve | 0.2 mm² … 1 mm² |
flexible with ferrule with plastic sleeve | 0.2 mm² … 0.75 mm² |
rigid (AWG) | 24 … 18 |
Stripping length | 8 mm |
Interface | PROFINET |
Number of interfaces | 2 |
Connection method | RJ45 |
Position | 5.x |
Locking | Locking clip |
Transmission physics | Twisted-Pair |
Features | Autonegotiation |
Autocrossing | |
Autopolarity | |
Half- or full-duplex | |
Topology | Star |
Line | |
Transmission speed | 100 Mbps |
Transmission length | max. 100 m |
Cycle time | 1 ms (RT) |
Access time | ≤ 2 s |
Standards | IEEE 802.3 |
IEC 61158 | |
IEC 61784-2 | |
Supported protocols | PROFINET |
Chipset | Renesas TPS-1 |
Electrical isolation | yes |
Width | 244 mm |
Height | 130 mm |
Depth | 125 mm |
Flammability rating according to UL 94 (housing / terminal blocks) | V0 |
Housing material | Metal |
ECLASS
ECLASS-9.0 | 27049201 |
ECLASS-11.0 | 27040705 |
ETIM
ETIM 8.0 | EC002850 |
UNSPSC
UNSPSC 21.0 | 26111700 |