Description
Axioline F, Analog output module, Analog outputs: 8, 0 V … 5 V, -5 V … 5 V, 0 V … 10 V, -10 V … 10 V, 0 mA … 20 mA, 4 mA … 20 mA, -20 mA … 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, Extreme conditions version, degree of protection: IP20, including bus base module and Axioline F connectors
| Dimensional drawing | |
| Width | 53.6 mm |
| Height | 126.1 mm |
| Depth | 54 mm |
| Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer’s declaration in the download area |
| Color | traffic grey A RAL 7042 |
| Axioline F local bus | |
| Number of interfaces | 2 |
| Connection method | Bus base module |
| Transmission speed | 100 Mbps |
| Module | |
| Input address area | 16 Byte |
| Output address area | 16 Byte |
| Required parameter data | 27 Byte |
| Required configuration data | 7 Byte |
| Analog | |
| Output name | Analog outputs |
| Connection method | Push-in connection |
| Connection technology | 2-conductor |
| Note regarding the connection technology | shielded, twisted pair |
| Number of outputs | 8 |
| D/A conversion time | 5 µs |
| D/A converter resolution | 16 bit |
| Protective circuit | Short-circuit and overload protection; electronic |
| Transient protection; Suppressor diode | |
| Data formats | IB IL, S7-compatible |
| Representation of output values | 16 bits (15 bits + sign) |
| Process data update | 300 µs |
| Current output signal | 0 mA … 20 mA |
| 4 mA … 20 mA | |
| -20 mA … 20 mA | |
| Load/output load current output | to 500 Ω |
| Voltage output signal | 0 V … 5 V |
| -5 V … 5 V | |
| 0 V … 10 V | |
| -10 V … 10 V | |
| Load/output load voltage output | > 2 kΩ |
| Permissible cable length | max. 250 m (Reference cable type LiYCY (TP) n*2*0.5 mm²) |
| Type | block modular |
| Product type | I/O component |
| Mounting position | any (observe temperature derating) |
| Scope of delivery | including bus base module and Axioline F connectors |
| Insulation characteristics | |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Potentials | |
| Power consumption | typ. 1.725 W (to UBus and UA; power input; no load, output 0 V) |
| max. 6.29 W (to UBus and UA; 8 current channels, output 20 mA) | |
| Potentials: Axioline F local bus supply (UBus) | |
| Supply voltage | 5 V DC (via bus base module) |
| Current draw | max. 130 mA |
| typ. 105 mA | |
| Power consumption | max. 0.65 W |
| typ. 0.525 W | |
| Potentials: Supply for analog modules (UA) | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC … 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 235 mA (8 current channels, 20 mA output) |
| typ. 110 mA (8 voltage channels, 10 V output) | |
| Power consumption | max. 5.64 W (8 current channels, 20 mA output) |
| Protective circuit | Surge protection; electronic (35 V, 0.5 s) |
| Reverse polarity protection; up to HW 01: polarity protection diodefrom HW 02: parallel diode; with external 5 A fuse (for startup only) | |
| Transient protection; Suppressor diode | |
| Connection technology | |
| Connection name | Axioline F connector |
| Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| Conductor connection | |
| Connection method | Push-in connection |
| Conductor cross section solid | 0.2 mm² … 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² … 1.5 mm² |
| Conductor cross section AWG | 24 … 16 |
| Stripping length | 8 mm |
| Axioline F connector | |
| Connection method | Push-in connection |
| Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| Conductor cross section, rigid | 0.2 mm² … 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² … 1.5 mm² |
| Conductor cross section AWG | 24 … 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C … 60 °C (Standard) |
| -40 °C … 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) | |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa … 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa … 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Permissible humidity (operation) | 5 % … 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % … 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
| Mounting position | any (observe temperature derating) |
8 analog, bipolar output channels for the connection of either voltage or current signals|Connection of actuators in 2-conductor technology|Voltage ranges: 0 V … 10 V, ±10 V, 0 V … 5 V, ±5 V|Current ranges: 0 mA … 20 mA, 4 mA … 20 mA, ±20 mA|Short-circuit-proof outputs|Device rating plate stored|Can be used under extreme ambient conditions|Extended temperature range of -40 °C … +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)|Partially coated PCBs
