Supported pipe materials

Metal pipes, Plastic pipes (soft/hard) ^*1

Supported fluids

Liquids (water, oil, adhesive, grease, chemical solutions, etc.) ^*1

Supported fluid temperature

0 °C (no freezing on the pipe surface) to 100 °C 32 to 212 °F (Pipe surface temperature)

Clamp set model

Plastic pipe/tube attachment

FD-XC8R1, FD-XC8R2, FD-XC8R3

Metal pipe attachment

FD-XC8M

Maximum rated flow rate

Outer diameter of pipe ø 6 0.24 “, 1/4 ” (6.35 mm) : 0 to 3000 mL/min
Outer diameter of pipe ø 8 0.31 “: 0 to 8000 mL/min

Zero cut flow rate

40 mL/min^*2 (variable, default)

Display resolution

Instantaneous flow rate

0.1/1/10 mL/min (Displayed on controller)

Shot amount

0.001/0.01/0.1/1 mL (Displayed on controller)

Repeatability

Plastic pipe/tube attachment

Response time: 50 ms

F.S.

± 0.1 %^*3*4

Instantaneous flow rate

Outer diameter of pipe ø 6 0.24 “, 1/4 ” (6.35 mm) : ±3 mL/min
Outer diameter of pipe ø 8 0.31 “: ±8 mL/min^*3*4

Response time: 500 ms

Outer diameter of pipe ø 6 0.24 “, 1/4 ” (6.35 mm) : ±1.0 mL/min
Outer diameter of pipe ø 8 0.31 “: ±2.6 mL/min^*3

Metal pipe attachment

Response time: 50 ms

F.S.

Outer diameter of pipe ø 6 0.24 “, 1/4 ” (6.35 mm) : ±0.3 %
Outer diameter of pipe ø 8 0.31 “: ±0.15 %^*3*4

Instantaneous flow rate

Outer diameter of pipe ø 6 0.24 “, 1/4 ” (6.35 mm) : ±9 mL/min
Outer diameter of pipe ø 8 0.31 “: ±12 mL/min^*3*4

Response time: 500 ms

Outer diameter of pipe ø 6 0.24 “, 1/4 ” (6.35 mm) : ±2.9 mL/min
Outer diameter of pipe ø 8 0.31 “: ±3.8 mL/min^*3

Hysteresis

Variable

Integrated unit display

0.1/1/10/100/1000/10000 mL (displayed on controller)

Display method

Status indicator

Environmental resistance

Enclosure rating

IP65/IP67 (IEC60529) , IP68G (JIS C0920) ^*5

Ambient temperature for usage

-10 to 60 °C (No freezing) 14 to 140 °F

Ambient humidity for usage

35 % to 85 %RH (No condensation)

Vibration resistance

10 to 55 Hz, double amplitude 1.5 mm 0.06 “, 2 hours each for X,Y,Z direction

Shock resistance

50 G 11 ms 3 times each for X,Y,Z direction

Material

Sensor head

Head body: PPS/PPSU, in-cable amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM

Clamp set

For plastic pipe

Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7

For metal pipe

Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7

Weight

Approx. 250 g