NCB1,5-8GM40-N0-V1-Y97264

## Datasheet excerpt: Technical data of NCB1,5-8GM40-N0-V1-Y97264### General specifications - **Switching function:** Normally closed (NC) - **Output type:** NAMUR - **Rated operating distance:** 1.5 mm - **Installation:** flush - **Assured operating distance:** 0 ... 1.215 mm - **Actual operating distance:** 1.35 ... 1.65 mm typ. - **Reduction factor r_Al:** 0.22 - **Reduction factor r_Cu:** 0.19 - **Reduction factor r₃₀₄:** 0.65 - **Output type:** 2-wire### Nominal ratings - **Nominal voltage:** 8.2 V (R_i approx. 1 kΩ) - **Switching frequency:** 0 ... 5000 Hz - **Hysteresis:** 1 ... 10 typ. 3 % - **Reverse polarity protection:** reverse polarity protected - **Short-circuit protection:** yes - **Current consumption:** - Measuring plate not detected: min. 3 mA - Measuring plate detected: ≤ 1 mA - **Switching state indicator:** Multihole-LED, yellow### Compliance with standards and directives - **Standard conformity:** - NAMUR: EN 60947-5-6:2000, IEC 60947-5-6:1999 - Electromagnetic compatibility: NE 21:2007 - Standards: EN 60947-5-2:2007, EN 60947-5-2/A1:2012, IEC 60947-5-2:2007, IEC 60947-5-2 AMD 1:2012### Approvals and certificates - **IECEx approval:** - Equipment protection level Ga: IECEx PTB 11.0037X - Equipment protection level Gb: IECEx PTB 11.0037X - Equipment protection level Da: IECEx PTB 11.0037X - Equipment protection level Mb: IECEx PTB 11.0037X - **ATEX approval:** - Equipment protection level Ga: PTB 00 ATEX 2048 X - Equipment protection level Gb: PTB 00 ATEX 2048 X - Equipment protection level Da: PTB 00 ATEX 2048 X - **UL approval:** - Ordinary Location: E87056 - Hazardous Location: E501628 - Control drawing: 116-0452### Ambient conditions - **Ambient temperature:** -25 ... 100 °C (-13 ... 212 °F) - **Storage temperature:** -40 ... 100 °C (-40 ... 212 °F)### Mechanical specifications - **Connection type:** Connector plug - **Housing material:** brass, nickel-plated - **Sensing face:** PBT - **Degree of protection:** IP67 - **Connector:** - Threading: M12 x 1 - Number of pins: 4### General information - **Use in the hazardous area:** see instruction manuals## Classifications | System | Classcode | |----------------|------------| | ECLASS 11.0 | 27270101 | | ECLASS 10.0.1 | 27270101 | | ECLASS 9.0 | 27270101 | | ECLASS 8.0 | 27270101 | | ECLASS 5.1 | 27270101 | | ETIM 8.0 | EC002714 | | ETIM 7.0 | EC002714 | | ETIM 6.0 | EC002714 | | ETIM 5.0 | EC002714 | | UNSPSC 12.1 | 39121550 |