Description
PCB headers, nominal cross section: 16 mm2, color: black, nominal current: 76 A (41 A in combination with PC 6 plug), rated voltage (III/2): 1000 V, type of contact: Male connector, number of rows: 1, number of positions: 6, product range: PC 6-16/..-G1U, pitch: 10.16 mm, mounting: Wave soldering, pin layout: Linear three-way pinning, solder pin [P]: 4 mm, number of solder pins per potential: 3, plug-in system: COMBICON PC 16, Pin connector pattern alignment: reversed, locking: without, mounting: without, type of packaging: packed in cardboard
| Product line | COMBICON Connectors XL |
| Product type | PCB headers |
| Number of positions | 6 |
| Pitch | 10.16 mm |
| Number of rows | 1 |
| Mounting flange | without |
| Pin layout | Linear three-way pinning |
| Solder pins per potential | 3 |
| Nominal current IN | 76 A (41 A in combination with PC 6 plug) |
| Nominal voltage UN | 1000 V |
| Degree of pollution | 3 |
| Rated voltage (III/3) | 1000 V |
| Rated surge voltage (III/3) | 8 kV |
| Rated voltage (III/2) | 1000 V |
| Rated surge voltage (III/2) | 8 kV |
| Mounting type | Wave soldering |
| Pin layout | Linear three-way pinning |
| Material data – contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | Electroplated silver |
| Metal surface contact area (top layer) | Silver (4 – 8 µm Ag) |
| Metal surface contact area (middle layer) | Nickel (2 – 4 µm Ni) |
| Metal surface soldering area (top layer) | Silver (4 – 8 µm Ag) |
| Metal surface soldering area (middle layer) | Nickel (2 – 4 µm Ni) |
| Material data – housing | |
| Color () | () |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Material data – actuating element | |
| Color () | () |
| Notes on operation | In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. |
| Dimensional drawing | |
| Pitch | 10.16 mm |
| Installed height | 17.4 mm |
| Solder pin length [P] | 4 mm |
| Air clearances and creepage distances | | |
| Specification | IEC 60664-1:2007-04 |
| Insulating material group | I |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Rated insulation voltage (III/3) | 1000 V |
| Rated surge voltage (III/3) | 8 kV |
| minimum clearance value – non-homogenous field (III/3) | 8 mm |
| minimum creepage distance (III/3) | 12.5 mm |
| Rated insulation voltage (III/2) | 1000 V |
| Rated surge voltage (III/2) | 8 kV |
| minimum clearance value – non-homogenous field (III/2) | 8 mm |
| minimum creepage distance (III/2) | 8 mm |
| Rated insulation voltage (II/2) | 1000 V |
| Rated surge voltage (II/2) | 6 kV |
| minimum clearance value – non-homogenous field (II/2) | 5.5 mm |
| minimum creepage distance (II/2) | 5.5 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C … 100 °C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
| Relative humidity (storage/transport) | 30 % … 70 % |
| Ambient temperature (assembly) | -5 °C … 100 °C |
| Type of packaging | packed in cardboard |
Well-known mounting principle allows worldwide use|Maximum flexibility when it comes to device design – one header for connectors with different connection technologies
