Aprašymas
T-coupler for converting RS-485 2-wire cable to two fiber optic cables, fiberglass, connection system: B-FOC, rail-mountable, max. data rate 57.6 kbps, not suitable for PROFIBUS/MPI
Electrical isolation | RS-485 // supply |
Maximum power dissipation for nominal condition | 2.64 W |
Test voltage data interface/power supply | 2 kV AC |
Supply | |
Nominal supply voltage | 24 V DC ±20 % (via COMBICON) |
Typical current consumption | max. 110 mA |
Switching | |
Output name | Relay output |
Output description | Alarm output |
Number of outputs | 1 |
Maximum switching voltage | 60 V AC/DC |
Limiting continuous current | 1 A |
Bit distortion, input | ± 35 % |
Bit distortion, output | ≤ 5 % |
Bit delay | ≤ 0.8 bit |
Signal | Modbus |
S-BUS | |
Suconet K | |
Data: optical FO | |
Transmission power | 28.18 µW (-15,5 dBm at 50/125 µm) |
63.1 µW (-12 dBm at 62,5/125 µm) | |
Transmit capacity, minimum | -15.5 dBm (50/125 µm) |
-12 dBm (62,5/125 µm) | |
Transmission length incl. 3 dB system reserve | 2700 m (with F-G 50/125 2.5 dB/km) |
2100 m (with F-G 50/125 3.0 dB/km) | |
2900 m (with F-G 50/125 3.4 dB/km) | |
3300 m (with F-G 62,5/125 3.0 dB/km) | |
2600 m (with F-G 50/125 2.5 dB/km) | |
Transmission protocol | Protocol-transparent to the RS-485 interface |
Connection method | B-FOC (ST®) |
Wavelength | 850 nm |
Minimum receiver sensitivity | -25 dBm (50/125 µm) |
-25 dBm (62,5/125 µm) | |
Data: RS-485 interface, 2-wire | |
Serial transmission speed | 6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500/ 1500 kbps |
Connection method | D-SUB-9 female connector |
COMBICON | |
Termination resistor | 150 Ω can be connected; pull up/down 390 Ω |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section AWG max. | 14 |
Conductor cross section AWG min. | 24 |
File format/coding | UART (11/10 bit switchable; NRZ), slip-tolerant |
Data direction switching | Automatic control |
Width | 45 mm |
Height | 75 mm |
Depth | 112 mm |
Material | ABS |
FO cable | |
Fiber types | 50/125 µm |
62.5/125 µm | |
Fiberglass |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | 0 °C … 50 °C |
EAC | |
Identification | EAC |
Electromagnetic compatibility | Conformance with EMC directive 89/336/EC |
Noise emission | EN 50081-2 |
Noise immunity | EN 50 082-2 |
Electrical isolation | RS-485 // supply |
Mounting type | DIN rail mounting |
Item number | 2761813 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Note | Made to Order (non-returnable) |
Sales Key | CNC |
Product Key | DNC222 |
Catalog Page | Page 390 (IF-2002) |
GTIN | 4017918131838 |
Weight per Piece (including packing) | 304.3 g |
Weight per Piece (excluding packing) | 304.3 g |
Customs tariff number | 85176200 |
Country of origin | DE |