Description
HEAVYCON ADVANCE B32 sleeve housing, for increased environmental requirements, EMC conductive, with Allen screw locking, with 1 x M32/1 x M20/1 x M12 straight cable outlet
| General | For contact inserts HC-B16, BB32, D40, DD72, HS6, HV6, M, K |
| Type | B32 |
| Product type | Housing with screw locking |
| Application | Offshore/EMC |
| No. of cable outlets | 3 |
| Type of the screw connection | 1x M32 / 1x M20 / 1x M12 |
| Fixing screws | M6 (screw head: 5 mm Allen screw) |
| Housing type | Sleeve housing |
| Locking type | Screw locking |
| Cable outlet | straight |
| Pg screw connection | none |
| Dimensional drawing | |
| Width | 94 mm |
| Height | 100 mm |
| Length | 126 mm |
| Installation dimensions | |
| Width of the assembly cutout | 70 mm |
| Length of the assembly cutout | 84 mm |
| Sealing material | NBR, conductive |
| Housing surface material | uncoated |
| Locking latch material | Stainless steel |
| Housing material | Die-cast aluminum, corrosion resistant |
| Ambient conditions | |
| Degree of protection | IP66 |
| IP68 (0.2 bar/24 h) | |
| IP69K | |
| Degree of protection | 4 (NEMA 250) |
| 4X (NEMA 250) | |
| 6P (NEMA 250) | |
| 12 (NEMA 250) | |
| Ambient temperature (operation) | -40 °C … 125 °C |
| Mechanical data | |
| Type of the screw connection | 1x M32 / 1x M20 / 1x M12 |
| Locking type | Screw |
| Assembly instructions | In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. |
| To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. | |
| Fixing screws | M6 (screw head: 5 mm Allen screw) |
