Description
Pre-assembled relay modules with screw connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Input voltage: 120 V AC, 2 changeover contacts, 8 A
| Product type | Relay Module |
| Application | Universal |
| Operating mode | 100% operating factor |
| Mechanical service life | 3x 107 cycles |
| Insulation characteristics | |
| Overvoltage category | III |
| Pollution degree | 3 |
| Service life electrical | see diagram |
| Maximum power dissipation for nominal condition | 1.08 W |
| Test voltage Winding/contact | 4 kV (50 Hz, 1 min., winding/contact) |
| Test voltage Contact/contact | 2.5 kV (50 Hz, 1 min., contact/contact) |
| Coil side | |
| Nominal input voltage UN | 120 V AC |
| Input voltage range | 93.6 V AC … 186 V AC |
| Typical input current at UN | 9 mA (at 50 Hz) |
| 7 mA (At 60 Hz) | |
| Typical response time | 3 ms … 12 ms |
| Typical release time range | 1.5 ms … 16 ms |
| Protective circuit | Varistor |
| Operating voltage display | Yellow LED |
| Switching | |
| Contact type | 2 changeover contacts |
| Type of switch contact | Single contact |
| Drive and function | monostable |
| Contact material | AgNi, hard gold-plated |
| Maximum switching voltage | 30 V AC |
| 36 V DC | |
| Minimum switching voltage | 100 mV (at 10 mA) |
| Limiting continuous current | 50 mA |
| Maximum inrush current | 50 mA |
| Min. switching current | 1 mA (at 24 V) |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Switching: when the gold layer is destroyed | |
| Note | the following values are applicable if a gold layer is destroyed |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V |
| Limiting continuous current | 8 A |
| Maximum inrush current | 15 A (300 ms) |
| Min. switching current | 10 mA |
| Interrupting rating (ohmic load) max. | 2000 VA (for 250 V AC) |
| Switching capacity | 2 A (at 24 V, DC13) |
| 0.2 A (at 110 V, DC13) | |
| 0.2 A (at 250 V, DC13) | |
| 2 A (at 24 V, AC15) | |
| 2 A (at 120 V, AC15) | |
| 2 A (at 250 V, AC15) | |
| Coil side | |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.14 mm² … 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² … 2.5 mm² |
| Conductor cross section AWG | 26 … 14 |
| Contact side | |
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.14 mm² … 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² … 2.5 mm² |
| Conductor cross section AWG | 26 … 14 |
| Width | 16 mm |
| Height | 78.5 mm |
| Depth | 71 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C … 60 °C |
| Ambient temperature (storage/transport) | -25 °C … 85 °C |
| Standards/regulations | IEC 60664 |
| EN 50178 |
| Mounting type | DIN rail mounting |
| Assembly instructions | in rows with zero spacing |
| Mounting position | any |
| Item number | 2834546 |
| Packing unit | 5 pc |
| Minimum order quantity | 5 pc |
| Note | Made to Order (non-returnable) |
| Sales Key | CK6 |
| Product Key | CK631G |
| Catalog Page | Page 395 (C-7-2015) |
| GTIN | 4046356044431 |
| Weight per Piece (including packing) | 70.65 g |
| Weight per Piece (excluding packing) | 65.44 g |
| Customs tariff number | 85364900 |
| Country of origin | CN |
ECLASS
| ECLASS-9.0 | 27371601 |
| ECLASS-10.0.1 | 27371601 |
| ECLASS-11.0 | 27371601 |
ETIM
| ETIM 7.0 | EC001437 |
UNSPSC
| UNSPSC 21.0 | 39122334 |
Safe isolation between coil and contact side|Logical contact arrangement thanks to 1/3-level relay base|Operational reliability thanks to sealed relay
