Description
PCB headers, nominal cross section: 2.5 mm2, color: pebble gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Male connector, number of rows: 1, number of positions: 10, product range: MSTBA 2,5/..-G -LA, pitch: 5 mm, mounting: Wave soldering, number of solder pins per potential: 1, plug-in system: COMBICON MSTB 2,5, Pin connector pattern alignment: Standard, locking: without, mounting: without
| Product line | COMBICON Connectors M |
| Product type | PCB headers |
| Number of positions | 10 |
| Pitch | 5 mm |
| Number of rows | 1 |
| Solder pins per potential | 1 |
| Nominal current IN | 12 A |
| Nominal voltage UN | 320 V |
| Degree of pollution | 3 |
| Rated voltage (III/3) | 250 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated voltage (III/2) | 320 V |
| Rated surge voltage (III/2) | 4 kV |
| Mounting type | Wave soldering |
| Material data – contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | Tin-plated |
| Metal surface contact area (top layer) | Tin (3 – 5 µm Sn) |
| Metal surface contact area (middle layer) | Nickel (1.3 – 3 µm Ni) |
| Metal surface soldering area (top layer) | Tin (3 – 5 µm Sn) |
| Metal surface soldering area (middle layer) | Nickel (1.3 – 3 µm Ni) |
| Material data – housing | |
| Color () | () |
| Insulating material | PBT |
| Insulating material group | IIIa |
| CTI according to IEC 60112 | 225 |
| Flammability rating according to UL 94 | V0 |
| Material data – actuating element | |
| Color () | () |
| Notes on operation | In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. |
| Dimensional drawing | |
| Pitch | 5 mm |
| Air clearances and creepage distances | | |
| Specification | IEC 60664-1:2007-04 |
| Insulating material group | IIIa |
| Comparative tracking index (IEC 60112) | CTI 225 |
| Rated insulation voltage (III/3) | 250 V |
| Rated surge voltage (III/3) | 4 kV |
| minimum clearance value – non-homogenous field (III/3) | 3 mm |
| minimum creepage distance (III/3) | 4 mm |
| Rated insulation voltage (III/2) | 320 V |
| Rated surge voltage (III/2) | 4 kV |
| minimum clearance value – non-homogenous field (III/2) | 3 mm |
| minimum creepage distance (III/2) | 3.2 mm |
| Rated insulation voltage (II/2) | 400 V |
| Rated surge voltage (II/2) | 4 kV |
| minimum clearance value – non-homogenous field (II/2) | 3 mm |
| minimum creepage distance (II/2) | 4 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C … 100 °C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40 °C … 70 °C |
| Relative humidity (storage/transport) | 30 % … 70 % |
| Ambient temperature (assembly) | -5 °C … 100 °C |
Maximum flexibility when it comes to device design – one header for connectors with different connection technologies|Snap-on, bright status indicator for the individual contacts|Well-known mounting principle allows worldwide use|Closed contour for optimum stability of the plug-in connection
