Description
Drive Shuttle, pole changing INTERBUS motor starter, 4 digital inputs, 24 V DC, IP54 protection
| Type | Stand-Alone |
| Supply | |
| Supply voltage | 24 V DC |
| Supply voltage range | 20 V DC … 30 V DC (including ripple) |
| Residual ripple | 3.6 VPP (within the permitted voltage range) |
| Typical current consumption | 0.3 A (plus sensor current) |
| Digital | |
| Number of inputs | 4 |
| Input voltage range “0” signal | -30 V DC … 5 V DC |
| Input voltage range “1” signal | 13 V DC … 30 V DC |
| Connection method | M12 connector |
| Connection technology | 3-, 4-conductor |
| Typical input current per channel | 5 mA (at 24 V DC) |
| Digital | |
| Number of outputs | 1 |
| Protective circuit | Electronic short-circuit protection |
| Connection method | M12 connector |
| Connection method | Remote bus/installation remote bus (with electrical isolation) |
| Transmission length | 260 mm |
| Width | 252 mm |
| Height | 130 mm |
| Length | 260 mm |
| Mounting type | Wall mounting |
| Item number | 2722111 |
| Packing unit | 1 pc |
| Minimum order quantity | 1 pc |
| Product Key | DRFABA |
| GTIN | 4017918132446 |
| Weight per Piece (including packing) | 5,420 g |
| Weight per Piece (excluding packing) | 5,420 g |
| Country of origin | DE |
ECLASS
| ECLASS-9.0 | 27240692 |
| ECLASS-10.0.1 | 27240692 |
| ECLASS-11.0 | 27240692 |
ETIM
| ETIM 7.0 | EC002584 |
