NJ2-11-N-G-V1-Y194329

Datasheet excerpt: Technical data of NJ2-11-N-G-V1-Y194329General specifications - Switching function: Normally closed (NC) - Output type: NAMUR - Rated operating distance: 2 mm - Installation: flush - Assured operating distance: 0 ... 1.62 mm - Actual operating distance: 1.8 ... 2.2 mm - Reduction factor r_Al: 0.4 - Reduction factor r_Cu: 0.3 - Reduction factor r_304: 0.85 - Output type: 2-wireNominal ratings - Nominal voltage: 8.2 V (R_i approx. 1 kΩ) - Switching frequency: 0 ... 3000 Hz - Hysteresis: 0.5 ... 3.5 typ. 2 % - Current consumption: - Measuring plate not detected: min. 3 mA - Measuring plate detected: ≤ 1 mAFunctional safety related parameters - MTTF_d: 5887 a - Mission Time (T_M): 20 a - Diagnostic Coverage (DC): 0 %Compliance with standards and directives - Standard conformity: - NAMUR: EN 60947-5-6:2000, IEC 60947-5-6:1999 - Standards: EN 60947-5-2:2007, EN 60947-5-2/A1:2012, IEC 60947-5-2:2007, IEC 60947-5-2 AMD 1:2012Approvals and certificates - IECEx approval: - Equipment protection level Ga: IECEx PTB 11.0037X - Equipment protection level Gb: IECEx PTB 11.0037X - Equipment protection level Da: IECEx PTB 11.0037X - Equipment protection level Mb: IECEx PTB 11.0037X - ATEX approval: - Equipment protection level Ga: PTB 00 ATEX 2048 X - Equipment protection level Gb: PTB 00 ATEX 2048 X - Equipment protection level Da: PTB 00 ATEX 2048 X - UL approval: - Ordinary Location: E87056 - Hazardous Location: E501628 - Control drawing: 116-0452 - ANZEx: 18.3018XAmbient conditions - Ambient temperature: -25 ... 100 °C (-13 ... 212 °F)Mechanical specifications - Connection type: Connector plug - Housing material: Stainless steel 1.4305 / AISI 303 - Sensing face: PVDF - Degree of protection: IP68 - Connector: - Threading: M12 x 1 - Number of pins: 4General information - Use in the hazardous area: see instruction manualsClassifications - System: ECLASS 11.0, Classcode: 27270101 - System: ECLASS 10.0.1, Classcode: 27270101 - System: ECLASS 9.0, Classcode: 27270101 - System: ECLASS 8.0, Classcode: 27270101 - System: ECLASS 5.1, Classcode: 27270101 - System: ETIM 8.0, Classcode: EC002714 - System: ETIM 7.0, Classcode: EC002714 - System: ETIM 6.0, Classcode: EC002714 - System: ETIM 5.0, Classcode: EC002714 - System: UNSPSC 12.1, Classcode: 39121550